I wired up everything the way the diagram (Guide #84011) depicts everything should be, but I get no audible chirp confirming the doors lock when using the two way remotes (RF442). When I lock with my old OEM fobs I get the chirp but not with the Fortin system. I also figure the alarm function of the EVO-ONE wont work if it isn't wired up to an audible device. I'm just unsure what wire from the EVO-ONE needs to go to the horn. The generic guide that came with the EVO-ONE (Guide #32991) states that the A7 Orange/Black wire goes to the Horn/Siren (-). If that's the case I still dont know which wire is the horn (-) on my steering column. WireColor states it should be the Blue/White wire on my steering column but that is also the color that I used for my Start (+) wire, so I have my doubts if this is correct because I dont think Ford would use the same color twice in the same area. I just dont want to tap into the wrong wire or spend a lot of time trouble shooting to find the right wire with a multimeter.
Also when programming the EVO-ONE, the only options I was able to tweak were alphebetical. I was not able to edit function 38 and select mode 2 the way the guide was telling me to do.
Lastly just out of curiosity I was wondering what all the E1-E8 options were for during programming. You can turn on/off each one but it doesn't give a description what each option does.
Mon compte
EVO-4-SERIES
EVO-9-SERIES
EVO-START
FlashLink Mobile
Audi
Chevrolet
Ford
GMC
Honda
Hyundai
Kia
Mazda
Nissan
RAM
Subaru
Toyota
Volkswagen
Trouver nos produits 
Commander nos produits en ligne
Trouver un 
